American Welding Society (AWS)

www.aws.org

 

D1.6

 

Structural Welding Code – Stainless Steel Note: Primary document that should be referenced for any structural welding application. It covers all aspects of welder qualification, joint design, inspection and other key issues. Do not use carbon steel structural welding standards!

A4.2

 

Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Austenitic-Ferritic Stainless Steel Weld Metal

 

A5.4

 

Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding

 

A5.11/A5.11M

 

Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding

 

A5.9

 

Specification for Bare Stainless Steel Welding Electrodes and Rods

 

A5.22

 

Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding

 

B2.1.014

 

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing

 

B2.1.013

 

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel, (M-8 / P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing

 

B2.1.010

 

 

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing

 

B2.1.009

 

 

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Austenitic Stainless Steel (M-8 / P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing

 

B2.1.006

 

 

Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing

 

B2.1.005

 

Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding Austenitic Stainless Steel, (M-8 / P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing

 

D10.4

 

Recommended Practices for Welding Austenitic Chromium Nickel Stainless Piping and Tubing